FX-401 frequency controlled crystal oscillator base stations refow process compatible surface mount package low phase noise build in pll-circuit features typical applications htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 previous vectron model number c3430 output frequency range 10 mhz C 700 mhz standard frequencies 10; 25; 26; 39.3216; 52; 56; 61.44;77.76; 104; 122.88 mhz 153.6; 155.52; 160; 184.32; 311.04; 491.52; 622.08 mhz parameter min typ max units condition input frequency 1 300 mhz 2 ppm standard input frequencies 10 mhz options 5 13 mhz 26 mhz 32,768 mhz signal hcmos hcmos / similar sinewave reference level 0.5 4 v pp reference input impedance 2 k ? reference frequency FX-401 page: 1/8
parameter min typ max units condition signal pecl lvpecl reference level min 1.355 1.68 v reference level max 2.155 2.42 v reference input impedance 50 ? signal lvds lvds reference level min -0.45 -0.25 v reference level max 0.25 0.45 v reference input impedance 100 ? parameter min typ max units condition output frequency 10 700 mhz signal hcmos load 15.0 pf rise and fall time 5 ns @ 15 pf 10 to 90 % duty cycle 40 60 % @ vs/2 signal pecl load 50 vs - 2v rise and fall time 1 ns 20 to 80 % duty cycle 45 55 % signal lvds load 100 rise and fall time 1 ns 10 to 90 % duty cycle 40 60 % parameter min typ max units condition supply voltage [standard] 3.135 3.3 3.465 vdc current consumption 50 ma steady state @ +25c & 3.3vdc parameter min typ max units condition phase noise 3 -95 dbc/hz 10 hz @ 10 mhz -125 dbc/hz 100 hz hcmos -142 dbc/hz 1 khz -155 dbc/hz 10 khz -160 dbc/hz 100 khz jitter 0.7 ps rms @ 10hz .. 100khz supply voltage (vs) output frequency htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 additional parameters reference frequency FX-401 page: 2/8
parameter min typ max units conditions phase noise 3 -75 dbc/hz 10 hz @ 311.04 mhz -105 dbc/hz 100 hz pecl -130 dbc/hz 1 khz -140 dbc/hz 10 khz -142 dbc/hz 100 khz jitter 0.2 ps rms @ 12khz .. 20mhz vcxo control pin 7 0,5 2,5 v weight 9 g processing & packing handling & processing note operating temperature range -20 +70 c operating temperature range -30 +85 c storage temperature range -55 +125 c parameter min typ max units condition supply voltage (vs) 6.0 v maximum output load @ cmos 40 pf additional parameters absolute maximum ratings FX-401 page: 3/8 htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100
enclosure htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 type g233 a input : single ended (hcmos or sinewave) output : 1x hcmos or pecl or lvds type g273 b input : complementary (pecl or lvds) output : 1x pecl or lvds package codes : height h pin length l options 5 height h pin length l options 5 5.9 na 5.9 na dimensions : mm dimensions : mm pin connections description pin connections description 1 vcxo control test output of the control voltage for the vcxo only for modul test or observance 1 vcxo control test output of the control voltage for the vcxo only for modul test or observance 2 lock detector output test output signal for pll lock detected. high signal ? pll in lock low signal ? pll out of lock only for modul test or observance 2 lock detector output test output signal for pll lock detected. high signal ? pll in lock low signal ? pll out of lock only for modul test or observance 3 n.c. 5 gnd 6;7 gnd ground connection. keep traces physically short and connect immediately to ground plane for best performance 6;7 gnd ground connection. keep traces physically short and connect immediately to ground plane for best performance 8 rf-out rf syncronised output. 8 rf-out rf syncronised output. 9 rf-out complementary / (gnd: single ended input only) rf syncronised output. ground connection: single ended input only 9 rf-out complementary rf syncronised output. 10 gnd 12 ref. frequency complementary in high stable complementary input frequency for syncronisation 13 ref. frequency in high stable input frequency for syncronisation 13 ref. frequency in high stable input frequency for syncronisation 14 vs power supply pin 14 vs power supply pin FX-401 page: 4/8
htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 enclosure type g273 c input : single ended (hcmos or sinewave) output : 2x pecl or lvds type g267 d input : single ended (hcmos or sinewave) output : 4x hcmos (same frequency) package codes : height h pin length l options 5 height h pin length l options 5 5.9 na 5.9 na dimensions : mm dimensions : mm pin connections description pin connections description 1 vcxo control test output of the control voltage for the vcxo only for modul test or observance 1 vcxo control test output of the control voltage for the vcxo only for modul test or observance 2 lock detector output test output signal for pll lock detected. high signal ? pll in lock low signal ? pll out of lock only for modul test or observance 2 lock detector output test output signal for pll lock detected. high signal ? pll in lock low signal ? pll out of lock only for modul test or observance 3 n.c. 5 gnd 5 rf-out 1 4 independent rf syncronised outputs 6 rf-out 1 rf output frequency 1 6 gnd ground connection. keep traces physically short and connect immediately to ground plane for best performance 7 compl. rf-out 1 complimentary rf output frequency 1 7 rf-out 2 4 independent rf syncronised outputs 8 rf-out 2 rf output frequency 2 8 rf-out 3 4 independent rf syncronised outputs 9 compl. rf-out 2 complimentary rf output frequency 2 9 gnd 10 gnd 10 rf-out 4 4 independent rf syncronised outputs 12 n.c. 13 ref. frequency in high stable input frequency for syncronisation 13 ref. frequency in high stable input frequency for syncronisation 14 vs power supply pin 14 vs power supply pin FX-401 page: 5/8
marking FX-401 frequency ayyww (10 mhz; hcmos output) (311,04 mhz; pecl output) frequency range [hz] jitter [ps rms] frequency range [hz] jitter [ps rms] 10hz to 100khz 0.708ps 12khz to 20mhz 0.168ps vs 8 1 5 4 0 8 1 5 4 vcxo pll circuit reference frequency vcxo lock detector vcxo control 0 vcxo vs vs 0 loop filter vs htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 typical phase noise and jitter block diagramm enclosure FX-401 page: 6/8
*bei w 24 mm nur untere lochreihe ? by w 24 mm only lower hole line gurtoberseite tape upper side gurtunterseite tape buttom side abwickelrichtung unwinding direction lage im gurt position in tape pin 1 a x p b k production tolerance complying din iec 286-3 enclosure type tape width w [mm] quantity per meter quantity per reel dimension p g194b tbd tbd tbd tbd profle feature pb-free assembly/ sn-pb assembly profle feature pb-free assembly/ sn-pb assembly average ramp-up rate (t l to t p) 3c/second max. time 25c to peak temperature 8 minutes max. preheat -temperature min ts min -temperature min ts max -time (min to max)(ts) 150c 200c 60-180 seconds time maintainted above -temperature (t l ) -time (t l ) 217c 60-150 seconds ts max to t l -ramp-up rate 3c/second max time maintainted above -temperature (t l ) -time (t l ) 217c 60-150 seconds time within 5c of actual peak temperature (t p ) 20-40 seconds peak temperature (t p ) max 260c ramp-down rate 6c/ second max note: all temperatures refer to topside of the package, measured on the package body surface. smd oscillators must be on the top side of the pcb during the refow process. standard shipping methode (for b-type enclosure) recommanded refow profle htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 FX-401 page: 7/8
rf output code: a: hcmos c: pecl d: lvds height: 1: a 5,9 mm 2: b 5,9 mm 3: c 5,9 mm 4: d 5,9 mm supply voltage code: e: 3,3 v temperature range: h: -30...+85c j: -20...+70c how to order this product: use this worksheet to forward the following information to your factory representative: model height - supply voltage code rf output code temperature range - reference frequency - output frequency FX-401 1 - e a j - - htttp://www.vectron.com vectron international?267 lowellroad , hudson, new hampshire 03051?tel:+1-88-vectron-1 vectron international gmbh & co. kg ? landstra?e, 74924 neckarbischofsheim, germany ? tel: +49 7268 801 100 FX-401 page: 8/8
|
